The Trimble Zephyr 3 Rugged GNSS Antenna (Twin Pack) is a pair of brand-new, high-shock, multi-constellation survey antennas engineered by Trimble for machine control, RTK rover and base setups, and precision GNSS positioning in demanding field environments.
Supplied as two identical units, this twin pack of the Trimble Zephyr 3 Rugged GNSS Antenna gives surveyors, machine control technicians and GIS professionals a matched pair ready to deploy as a base-and-rover combination, a dual-antenna heading system, or two independent field-ready spares without waiting on a second order.
Compact and lighter than its Zephyr 2 Rugged predecessor, the Zephyr 3 Rugged antenna is purpose-built for high-shock and high-vibration environments such as dozer blades, graders, excavators and other machine control platforms, while still delivering the millimetre-level phase centre accuracy that survey-grade GNSS work demands.
Key Benefits & Features of the Trimble Zephyr 3 Rugged GNSS Antenna
Comprehensive Multi-GNSS Signal Tracking
The Trimble Zephyr 3 Rugged GNSS antenna tracks the full range of current and near-future GNSS signals, giving your receiver more usable satellites and stronger fixes in obstructed or challenging sky-view conditions:
- GPS: L1, L2, L5
- GLONASS: L1, L2, L3
- BeiDou: B1, B2, B3
- Galileo: E1, E5a, E5b
- QZSS: L1, L2, L5, LEX
- IRNSS: L5
- SBAS: WAAS, EGNOS, GAGAN, MSAS
- MSS correction services: OmniSTAR, Trimble RTX
Millimetre Phase Centre Repeatability
A four-point antenna feed design gives the Zephyr 3 Rugged stable, repeatable phase centre behaviour and enhanced polarisation, so your coordinates stay consistent between sessions and across long baselines.
Built for High-Shock, High-Vibration Machine Control Work
Rated to withstand 75G of shock and 20.4 gRMS of vibration, this GNSS antenna is designed to live on moving machinery — dozers, graders, excavators as well as static RTK base and rover setups, without losing lock or suffering physical damage.
Advanced Interference Filtering
Built-in filtering reduces interference from nearby Iridium transmitters and Japanese LTE base stations, while a low-noise amplifier (LNA) suppresses out-of-band signals from high-power transmitters keeping satellite tracking clean even in electronically noisy jobsites.
Rugged, Sealed Housing
An IP69K-rated housing protects the internal electronics from dust, high-pressure wash-downs and driving rain, and the antenna is rated to operate from ‑40°C to +85°C, so it keeps working through Australian summers and cold high-altitude survey sites alike.
Two Antennas, One Order
This listing supplies two (2) Trimble Zephyr 3 Rugged GNSS antennas, ideal for crews standardising a fleet of machine control units, building a matched base/rover pair, or simply keeping a genuine Trimble spare on hand to minimise field downtime.
 Specifications: Trimble Zephyr 3 Rugged GNSS Antenna
| Feature | Specification |
| Brand / Model | Trimble Zephyr 3 Rugged GNSS Antenna |
| Manufacturer Part Number | 125000-20 (5/8″-11 thread-mount version) |
| Pack Quantity | 2 x GNSS antennas |
| Condition | New |
| GNSS Tracking | GPS, GLONASS, BeiDou, Galileo, QZSS, IRNSS, SBAS, OmniSTAR, Trimble RTX |
| Dimensions (per unit) | 18.7 cm diameter x 8.6 cm height (5/8″ thread-mount version) |
| Weight (per unit) | 1.79 kg |
| Input Voltage | 3.5 – 20 VDC |
| Input Current | 125 mA |
| Signal Gain | 50 dB |
| Signal Connector | TNC |
| Mounting | 5/8″-11 thread mount |
| Operating Temperature | ‑40°C to +85°C |
| Environmental Sealing | IP69K |
| Shock / Vibration Rating | 75G shock, 20.4 gRMS vibration |
| Use Case | Machine control, RTK base/rover, survey, mapping, precision agriculture |
Applications & Use Cases
Machine Control & Construction Guidance
Mount the Zephyr 3 Rugged directly on excavators, dozers and graders where shock and vibration would damage a standard survey antenna, keeping 3D machine control systems locked onto satellites throughout the shift.
RTK Base & Rover Networks
Use one antenna as a fixed RTK base reference and the second as a rover unit, or run both as a redundant pair, delivering centimetre-level corrections across your survey network.
Precision Agriculture & Autosteer
The rugged housing and wide GNSS coverage make this antenna well suited to autosteer and guidance systems on agricultural machinery operating in dusty, high-vibration paddock conditions.
Survey-Grade Mapping & GIS Data Collection
Pair with a compatible Trimble GNSS receiver for topographic surveys, cadastral mapping and GIS asset capture where reliable multi-constellation tracking is essential.
What’s Included
- 2 x Trimble Zephyr 3 Rugged GNSS Antenna (P/N 125000-20)
- Condition: New
- TNC signal connector on each unit
Note: Mounting brackets, antenna cables and GNSS receivers are NOT included unless specified see our Trimble GNSS antenna cables to complete your setup.
Why Buy This Trimble Zephyr 3 Rugged Twin Pack
- Genuine Trimble GNSS antennas, supplied brand new
- Two antennas in one purchase ideal for base/rover pairs or fleet standardisation
- IP69K sealed, 75G shock-rated housing built for machine control environments
- Full multi-GNSS coverage across GPS, GLONASS, BeiDou, Galileo, QZSS, IRNSS and SBAS
- Backed by Survey Equipments Australia’s local support and Australia-wide shipping
Frequently Asked Questions
What satellite systems does the Trimble Zephyr 3 Rugged GNSS Antenna support?
It tracks GPS (L1/L2/L5), GLONASS (L1/L2/L3), BeiDou (B1/B2/B3), Galileo (E1/E5a/E5b), QZSS, IRNSS, SBAS (WAAS, EGNOS, GAGAN, MSAS) and MSS correction services including OmniSTAR and Trimble RTX.
How many antennas come in this listing?
This listing is a twin pack you will receive two (2) brand-new Trimble Zephyr 3 Rugged GNSS antennas.
Is the Zephyr 3 Rugged antenna suitable for machine control?
Yes. It is specifically engineered for high-shock, high-vibration environments such as dozers, graders and excavators, with a 75G shock rating and 20.4 gRMS vibration rating.
What connector and mounting does this antenna use?
Each antenna uses a TNC signal connector and a 5/8″-11 thread mount, compatible with standard survey poles and machine control brackets.
Is this antenna weatherproof?
Yes, the housing carries an IP69K environmental seal and operates from ‑40°C to +85°C, making it suitable for permanent outdoor and machine-mounted installation.
Is this antenna compatible with non-Trimble GNSS receivers?
The Zephyr 3 Rugged uses a standard TNC GNSS antenna connection, so it can be used with third-party receivers that accept a compatible GNSS antenna input, in addition to Trimble receivers.
Does this listing include cables, brackets or a receiver?
No — this listing covers the two antenna units only. Mounting brackets, antenna cables and GNSS receivers can be purchased separately.
What is the difference between the Zephyr 3 Rugged and the Zephyr 3 Base antenna?
The Rugged version is built for high-shock, high-vibration use such as machine control, while the Trimble Zephyr 3 Base GNSS Antenna is optimised for static base station and CORS reference installations.





Reviews
There are no reviews yet.