The Topcon HiPer V FH915 is a 226-channel, dual-frequency GPS + GLONASS GNSS receiver with a built-in FH915+ 900 MHz frequency-hopping spread spectrum radio. One receiver can be set up as an RTK base station that broadcasts corrections or as an RTK rover that receives them, giving cm-level positioning for surveying, construction set-out and machine control work. This refurbished kit includes everything needed to put the receiver to work in the field: tribrach, radio antenna, two batteries, dual charger, 12V field power lead and a Topcon transport case.
Why Choose the Topcon HiPer V FH915 RTK Receiver?
The HiPer V packs the GNSS board, Fence Antenna, 900 MHz radio, Bluetooth and battery into one cable-free housing. Its 900 MHz spread spectrum link is the same radio band used by many Topcon base/rover and machine control systems, so it slots straight into an existing 900 MHz fleet running on the same frequency.
- Base or rover in one unit run it as your job-site base, or as a rover paired with a Topcon 900 MHz base.
- Spread spectrum radio built in FH915+ 900 MHz Rx/Tx radio, no external radio or cables needed.
- Multi-constellation tracking GPS (L1/L2/L2C), GLONASS, QZSS and SBAS for fast, reliable fixes.
- Ready-to-work kit tribrach, two batteries, dual charger and 12V alligator-clip power lead included.
- Built for the field IP67 dust and water protection and a rugged magnesium alloy housing.
- Refurbished value a tested Topcon RTK receiver kit for a fraction of the cost of a new system.
 Key Features : Topcon HiPer V
Vanguard Technology with 226 Universal Channels
Topcon’s Vanguard Technology uses Universal Tracking Technology, so any of the 226 channels can track any available satellite signal. The result is faster initialisation and a more stable RTK fix in partially obstructed areas.
Fence Antenna Signal Reception
The precision Fence Antenna element improves reception near trees, buildings and other obstructions, helping the receiver acquire and hold satellite lock.
FH915+ 900 MHz Spread Spectrum Radio Modem
The internal FH915+ radio transmits and receives in the 900 MHz band using frequency-hopping spread spectrum. As a base, the HiPer V broadcasts RTK corrections; as a rover, it receives corrections from a Topcon 900 MHz base operating on the same frequency all without external radio hardware.
Voice Status Messages
Spoken messages report satellite tracking, radio link, low battery and memory status, so the operator does not need to keep checking LEDs or the controller.
Dual Li-ion Battery Kit and Field Power
Two lithium-ion batteries and a dual charger let you keep one battery charging while the other is in use. The 12V power supply with alligator clips lets you run a base station from a vehicle or external battery for long sessions.
Topcon HiPer V FH915 Specifications
| Specification | Details |
|---|---|
| Brand / Model | Topcon HiPer V |
| Internal Radio | FH915+ frequency-hopping spread spectrum, 900 MHz, Rx/Tx |
| Configuration | Single receiver RTK base or RTK rover |
| Tracking Channels | 226 channels, Universal Tracking Technology |
| Satellite Systems | GPS (L1, L2, L2C), GLONASS (L1/L2), QZSS, SBAS |
| Static Accuracy (L1+L2) | H: 3mm + 0.5ppm, V: 5mm + 0.5ppm (typical) |
| RTK Accuracy (L1+L2) | H: 10mm + 1ppm, V: 15mm + 1ppm |
| DGPS Accuracy | Less than 0.5m |
| Data Formats | RTCM SC104 2.x/3.x, CMR, CMR+, NMEA, TPS |
| Wireless | Bluetooth for controller connection |
| Data Storage | SD / SDHC card |
| Status Display | LED indicators plus voice messages |
| Dust / Water Protection | IP67 |
| Shock Rating | 2m pole drop |
| Housing | Rugged magnesium alloy |
| Power | Internal Li-ion batteries (2 supplied) or external 12V DC |
| Mounting | Standard 5/8″-11 thread, supplied Topcon tribrach |
| Condition | Refurbished tested and checked |
What’s in the Box
- 1 x Topcon HiPer V Base/Rover Receiver
- Internal FH915+ Spread Spectrum 900 MHz Rx/Tx Radio
- Utilises GPS, L2C, GLONASS, QZSS & SBAS Satellites
- 1 x 12V Power Supply with Alligator Clips
- 1 x Dual Battery Charger with Power Supply
- 2 x Lithium-Ion Batteries
- 1 x 900 MHz Radio Antenna
- 1 x Topcon Tribrach
- 1 x Topcon Transport Case
Applications for the Topcon HiPer V GNSS Receiver
- Topographic, detail and as-built surveys
- Construction set-out and stakeout
- Earthworks, volume and grade checking
- Base station for Topcon 900 MHz machine control systems
- Cadastral and boundary surveys
- Static control and baseline measurement
- GIS data collection and mapping
- Expanding an existing Topcon 900 MHz base/rover fleet
Frequently Asked Questions
What is the Topcon HiPer V FH915?
It is a Topcon HiPer V dual-frequency GPS + GLONASS GNSS receiver fitted with an internal FH915+ 900 MHz spread spectrum radio. It works as an RTK base or RTK rover for cm-level positioning.
Can this HiPer V be used as a base and a rover?
Yes. The receiver can be configured as either a base or a rover. For a full RTK system you need a second 900 MHz receiver (base or rover) or another correction source.
Will it work with my existing Topcon 900 MHz equipment?
The FH915+ radio links with Topcon base/rover and machine control kits operating on the same 900 MHz frequency and radio settings.
Which satellites does the Topcon HiPer V track?
It tracks GPS (including L2C), GLONASS, QZSS and SBAS satellites on 226 universal channels.
How accurate is the Topcon HiPer V in RTK mode?
RTK accuracy with L1+L2 signals is 10mm + 1ppm horizontal and 15mm + 1ppm vertical.
What comes in this Topcon HiPer V kit?
The HiPer V receiver, 900 MHz radio antenna, two Li-ion batteries, a dual battery charger with power supply, a 12V power supply with alligator clips, a Topcon tribrach and a Topcon transport case.
What condition is this receiver in?
It is refurbished and has been tested and checked before dispatch.
Can I use a 900 MHz radio in my region?
Radio rules differ between countries. Please check your local spectrum regulations for 900 MHz spread spectrum equipment before operating the radio.
Related Survey Equipment
- Power Stick Battery Pack for Topcon HiPer GPS Base extended external power for long base sessions
- RTK GPS Quick Release Adapter for Topcon Survey Poles mount and remove your receiver in seconds
- 5/8-11 Thread Quick Release Adapter quick-change mounting for tribrach, tripod or pole
- 2.2m Carbon Fibre GNSS Measuring Pole lightweight rover pole for RTK work
- Carbon Fibre Telescopic RTK Pole 1.25-2.2m adjustable rover rod for field surveys






Reviews
There are no reviews yet.