The IP67 waterproof hard tool case with wheels is a rotomoulded-style, high-impact PP protective case built to carry tools, survey instruments and sensitive equipment through dust, rain and rough job-site handling.
Rated IP67 for full dust protection and temporary immersion up to 1 metre, it pairs a heavy-duty square shell with smooth spinner wheels so a fully loaded case can be rolled rather than carried.
It is available in two configurations: a compact No Tie Rod version and a With Tie Rod version that adds an extendable pull handle for long-distance rolling.
Key Features & Benefits
IP67-Rated Waterproof & Dustproof Protection
- Certified IP67: fully dust-tight and protected against temporary immersion in up to 1 metre of water for 30 minutes
- Sealed draw-latch buckle closure keeps moisture, dust and grit away from stored equipment
- A pressure-release knob with O-ring lets you equalise internal pressure after altitude or temperature changes without breaking the seal
Heavy-Duty, Shockproof Build
- Constructed from high-impact PP plastic in a reinforced square profile for maximum structural stability
- Operating temperature range of -40°C to 98°C suits harsh outdoor and industrial environments
- Reinforced draw latches stay locked tight even under heavy impact
Spinner Wheels for Effortless Mobility
- Smooth-rolling spinner wheels move heavy, fully loaded cases with minimal effort
- With Tie Rod variant adds a telescopic pull handle for wheeling the case like luggage across long distances
- No Tie Rod variant keeps a lower profile and lighter carry weight for tighter storage spaces
Spacious, Customisable Interior
- Generous 700 x 550 x 450 mm (70 x 55 x 45 cm) interior comfortably stores bulky tools, instruments and outdoor gear
- Interior accepts pre-cut or customised foam so every tool has its own protected cavity
- Recessed areas near the handle and lid support asset tags, and padlock-ready holes let you secure the case for transport or storage
Specifications
| Model Number | EPC020-2B |
| Material | High-impact PP plastic |
| IP Rating | IP67 (dust-tight, temporary immersion to 1m / 30 min) |
| Certification | ISO9001 / RoHS / REACH / IP67 |
| Function | Waterproof, Shockproof, Dustproof |
| Closure Type | Buckle draw latch |
| Wheel Type | Spinner wheels |
| Shape | Square, flat surface |
| Exterior Dimensions | 700 x 550 x 450 mm (70 x 55 x 45 cm) |
| Operating Temperature | -40°C to 98°C |
| Interior Foam | Pre-cut foam compatible; customisable layout |
| Variants | No Tie Rod / With Tie Rod (extendable pull handle) |
| Condition | New |
Use Cases
- Survey & field equipment transport: protect GNSS receivers, total station accessories and data collectors from dust and moisture on site
- Industrial & trade tools: organise and safeguard hand tools, power tools and diagnostic equipment during transport
- Outdoor & travel use: withstands rain, humidity and rough handling for camping, 4WD and remote-site work
- Sensitive electronics: foam-customisable interior protects cameras, testers and precision instruments in transit
Frequently Asked Questions
Is this tool case genuinely waterproof?
Yes. The case carries an IP67 rating, meaning it is fully dust-tight and protected against temporary immersion in up to 1 metre of water for 30 minutes. The buckle draw-latch closure and gasket seal keep the interior dry in rain, mud and washdown conditions.
What is the difference between the No Tie Rod and With Tie Rod versions?
Both versions share the same IP67-rated shell, dimensions and spinner wheels. The With Tie Rod version adds a telescopic pull handle so you can wheel it like rolling luggage, while the No Tie Rod version omits the handle for a lower profile and lighter overall weight.
What are the interior dimensions and can I fit custom foam?
The case measures 700 x 550 x 450 mm (70 x 55 x 45 cm) externally and is designed to accept pre-cut or customised foam inserts, so you can create a tailored cavity for each tool or instrument.
What temperature range can this case handle?
The high-impact PP shell is rated for continuous use from -40°C to 98°C, making it suitable for cold-store, outdoor and hot-climate job sites.
Does the case have a pressure release valve?
Yes. A pressure-release knob with an O-ring seal lets you equalise pressure inside the case after temperature or altitude changes, without compromising the IP67 seal.
Can this case be locked for secure transport?
Yes. The lid and body include padlock-ready holes alongside the buckle latches, so you can add your own padlocks for secure transport or storage.




Reviews
There are no reviews yet.